Brake Hold - Suzuki ACROSS 2020 Series Owner's Manual

NOTICE
When the system malfunctions
■
Stop the vehicle in a safe place and
check the warning messages.
When the parking brake cannot
■
be released due to a malfunction
Driving the vehicle with the parking
brake set will lead to brake compo-
nents overheating, which may affect
braking performance and increase
brake wear. Have the vehicle
inspected by a SUZUKI dealer or a
qualified workshop immediately if this
occurs.
5-2. Driving procedures

Brake Hold

The brake hold system keeps
the brake applied when the
shift lever is in D, S or N with
the system on and the brake
pedal has been depressed to
stop the vehicle. The system
releases the brake when the
accelerator pedal is depressed
with the shift lever in D or S to
allow smooth start off.
Enabling the system
Press the brake hold switch to turn
the brake hold system on
The brake hold standby indicator
A
(green) comes on. While the sys-
tem is holding the brake, the brake hold
operated indicator (yellow)
on.
Brake hold system operating con-
■
ditions
The brake hold system cannot be turned
on in the following conditions:
The driver's door is not closed.
●
The driver is not wearing the seat belt.
●
If any of the conditions above are
detected when the brake hold system is
291
5
B
comes