Cvt Air Filter - BRP can-am COMMANDER 2017 Series Operator's Manual

MAINTENANCE PROCEDURES
tmo2014-001-008_a
FRONT OF VEHICLE - COMPONENTS
REMOVED FOR CLARITY
1. Front grill kit
2. Clean front grill kit with water.

CVT Air Filter

CVT air filter inspection and cleaning
frequency should be adjusted accord-
ing to riding conditions as it is critical
to ensure proper engine performance
and life span.
CVT Air filter inspection and cleaning
frequency must be increased for the
following severe riding conditions:
– Riding on dry sand.
– Riding on dry dirt covered surfaces.
– Riding on dry gravel trails or similar
conditions.
– Riding in areas with high concentra-
tion of seeds or crop husks.
– Riding in severe snow conditions.
NOTE: Riding in a group in these con-
ditions would increase even more the
air filter replacement requirement.
CVT Air Filter Removal
1. Remove CVT air filter plastic cover
located on left hand side of hood
near driver.
______________
94
tmo2011-001-080_a
1. CVT air filter plastic cover
2. Slide the cover rearward.
tmo2011-001-079_b
Step 1: Slide rearward
3. Pull CVT air filter out.
tmo2011-001-077_a
1. CVT air filter
CVT Air Filter Inspection and
Cleaning
1. Inspect filter and replace if dam-
aged.