BRP can-am COMMANDER 2017 Series Operator's Manual page 17

ITEMS TO BE
INSPECTED
Cargo and load
Rear cargo box
Chassis and
suspension
What to Do Before Starting the Engine (Key ON)
ITEMS TO BE
INSPECTED
Gauge
Lights and reflectors
Seats, side nets and
seat belts
Accelerator pedal
________
INSPECTION TO PERFORM
Cargo Load: If you transport a cargo, respect the maximum
load capacity of 272 kg (600 lb).
Ensure cargo is properly secured to the rear cargo box.
Vehicle Load: Ensure that total load on the vehicle
(including operator, passenger, cargo, tongue weight and
added accessories) does not exceed 363 kg (800 lb).
If you are pulling a trailer or another equipment:
– Check hitch and trailer ball condition.
– Respect the tongue capacity and towing capacity.
– Ensure trailer is properly secured to hitch.
Check if the cargo box is properly latched.
Check if both tail gates are properly latched.
Check underneath vehicle for any debris on chassis or
suspension and clean them properly.
INSPECTION TO PERFORM
Check operation of indicator lamps in gauge (during first
few seconds of key ON).
Check for messages in gauge.
Check cleanliness of headlights, taillights, turn signals,
position lights and reflectors.
Check operation of headlights (high and low beams), brake
lights, turn signals and position lights.
Check operation of hazard warning lights.
Check if seats are properly latched.
Check side nets for any damage.
Have the nets replaced if any damage is found.
Fasten both side nets and confirm that they latch securely.
Use the adjustment strap to tighten the net as required.
Check seat belts for any damage.
Fasten seat belts and confirm that they latch securely.
Press on the accelerator pedal a few times to ensure it
operates freely and it returns to the rest position when
released.
SAFETY INFORMATION
PRE-RIDE INSPECTION
________
✔
✔
15