BRP can-am COMMANDER 2017 Series Operator's Manual page 105

Remove the muffler cover.
tmo2011-001-040_a
1. Muffler cover
2. Exhaust tail pipe
Remove and discard the tail pipe retain-
ing screws.
tmo2011-001-045_a
1. Retaining screws
Remove exhaust tail pipe, gasket (dis-
card) and spark arrester.
tmo2011-001-041_a
1. Spark arrester
2. Gasket
3. Exhaust tail pipe
Remove carbon deposits from the
spark arrester using a brush.
NOTICE
careful to avoid damaging spark ar-
rester mesh.
tmo2011-001-043_a
1. Clean spark arrester
Inspect mesh of spark arrester for any
damage. Replace as required.
Inspect spark arrester chamber in muf-
fler. Remove any debris as required.
Reinstall the muffler spark arrester in
the reverse of the removal procedure.
However pay attention to the follow-
ing.
Install new gasket and retaining
screws. Torque to specification.
______________
MAINTENANCE PROCEDURES
Use a soft brush and be
103