BRP can-am COMMANDER 2017 Series Operator's Manual page 102

MAINTENANCE PROCEDURES
tmo2015-001-303_a
1. Cooling system drain plug access
NOTE: Do not unscrew the coolant
drain plug completely.
tmo2011-001-120_a
1. Oil filter cover
2. Water pump cover
3. Coolant drain plug
4. Disconnect the lower radiator hose
and drain the remaining coolant into
a suitable container.
NOTE: Take note of the position of the
hose clamp on the lower radiator hose
at the radiator.
______________
100
tmr2011-011-029_a
1. Hose clamp position to note
2. Lower radiator hose to remove
5. Drain cooling system completely.
6. Reinstall cooling system drain plug.
TORQUE
Cooling system
drain plug
7. Reinstall radiator hose as noted prior
to removal.
TORQUE
Radiator hose
clamp
8. Siphon the cooling system expan-
sion tank.
9. Bleed cooling system, refer to
COOLING SYSTEM BLEEDING
Cooling System Bleeding
800R Models
1. Unscrew bleed screw on thermo-
stat housing cover of front cylinder.
9 N•m to 11 N•m
(80 lbf•in to 97 lbf•in)
2.5 N•m to 3.5 N•m
(22 lbf•in to 31 lbf•in)
.