BRP can-am COMMANDER 2017 Series Operator's Manual page 65

4) Analog Tachometer (RPM)
Measures engine revolutions per minute (RPM). Multiply by 1000 to obtain actual
revolutions.
5) Indicator Lamps
Indicator lamps will inform you of various conditions or problems.
An indicator lamp can flash alone or in combination with another lamp.
INDICATOR LAMP(S)
All indicator lamps
SPORT
MODE
6) Main Digital Display
Displays useful real-time information to the rider.
7) Multifunction Display
The vehicle speed or the engine revolutions (RPM) can be displayed. See
(M) BUTTON
in this section.
MULTIFUNCTION GAUGE (ANALOG/DIGITAL) (XT MODELS)
All indicator lamps are activated when ignition
On
switch is ON and the engine is not started
On Low fuel
On Check engine
High engine temperature
On
On Headlights in the HIGH beam position
Operator seat belt is not properly latched.
Engine output will be limited, reducing
On/Flash
the speed and operability of the vehicle.
Main digital display: FASTEN SEAT BELT
On Sport mode activated
On ECO mode activated
Flashing Turn signal or hazard warning lights flashing
_______________
DESCRIPTION
MODE
63