Engine Coolant - BRP can-am COMMANDER 2017 Series Operator's Manual

MAINTENANCE PROCEDURES
If available, use a garden hose to rinse
the radiating fins.
CAUTION Never clean radiator
with your hands when it is hot. Let
the radiator cool down before clean-
ing.
NOTICE
Be careful not to damage
the radiating fins when cleaning. Do
not use any object/tool that could
damage the fins. When hosing, use
low pressure only. Never use a HIGH
PRESSURE washer.

Engine Coolant

Engine Coolant Level Verification
WARNING
Check coolant level with engine
cold.
1. Place vehicle on a level surface.
2. Open service cover.
3. Remove the pressure cap.
WARNING
In order to avoid potential burns,
do not remove the pressure cap if
the engine is hot.
______________
98
tmo2011-001-313_b
1. Engine air filter housing cover
2. Coolant expansion tank cap
3. Pressure cap
4. Ensure cooling system is full up to
the pressure cap seat.
tmr2011-011-028_a
1. Cooling system refill adapter
2. Expansion tank hose
3. Coolant system full level (pressure cap seat)
5. Add coolant in system as necessary.
6. Properly reinstall pressure cap on re-
fill adapter.
7. Check coolant level in expansion
tank.
NOTE: Coolant level can be checked
by looking at the side of the coolant
expansion tank under the RH front
fender.