BRP can-am COMMANDER 2017 Series Operator's Manual page 48

PRIMARY CONTROLS
tmo2014-002-011_b
1. Shift lever
2. Park
3. Reverse
4. Neutral
5. High range (forward)
6. Low range (forward)
The vehicle must be stopped and
brakes applied prior to selecting any
gear.
NOTICE
This gearbox is not de-
signed to shift while vehicle is mov-
ing.
Park
The park position locks the gearbox to
help prevent vehicle movement.
WARNING
Always use the PARK (P) position
when the vehicle is not in oper-
ation. The vehicle can roll if the
shift lever is not set to P (PARK).
The shift lever can be locked in PARK
(P) position with a key to prevent any
unauthorized use of the vehicle.
______________
46
tmo2014-006-004_a
TYPICAL - SHIFT LEVER CAN BE LOCKED IN
PARKED POSITION
1. Shift lever locking key
Two locking keys are supplied with the
vehicle.
WARNING
The shift lever should be locked
whenever the vehicle is in PARK
(P) and unattended.
Reverse
The reverse position allows the vehicle
to go backwards.
NOTE: In reverse operation, the en-
gine's RPM is limited, thus limiting the
vehicle reverse speed.
WARNING
When driving downhill in reverse,
gravity can increase the vehicle
speed above the set limited re-
verse speed.
Neutral
The neutral position disengages the
gearbox.
High Range (Forward)
This position selects the high speed
range of the gearbox. It is the normal
driving speed range. It allows the vehi-
cle to reach its maximum speed.