Unpack The Ap1000I; Power Requirements; Additional Equipment - Meru Networks AP1000 Installation Manuals

Unpack the AP1000i

AP1000i series uses both the dual radio (AP1020) and single radio (AP1010) models. Confirm that the
shipping box contains the following:
AP1000i ships with built-in ceiling mount clips. Each radio has two built-in antennas, so AP1010 has

two built-in antennas and AP1020 has four built-in antennas.
Locking tool for ceiling mount locking. You can see a drawing of this in

Note:
01.

Power Requirements

Radios on an AP1000i use 2x2 MIMO configuration. To power an AP1000i, use either an 802.3af or
802.3at PoE cable; either one works automatically with no configuration required. For a list of
supported PoEs, see the appendix

Additional Equipment

The following AP1000i mounting options require the listed additional equipment:
.
Installation Type
Ceiling mounting on a
suspended ceiling with or
without locking
Wall mounting
© 2013 Meru Networks, Inc.
If you want to lock AP1000i to the wall, you need the optional kit MNT-WMKIT-
Supported Power Over Ethernet Devices for Meru APs
Additional Equipment
Either an 802.3af or 802.3at PoE cable

Either an 802.3af or 802.3at PoE cable

Wall mount screws – Recommend #6, #8 (M3, M3.5)

Unpack the AP1000i
Figure 5.
Installing AP1000i 9