Double Chamber - Vacuum Packaging Machines VC999 K12/K12N/K12A/K12NA
Operation
9.4.5
Intervention in the packaging cycle
The following intervention is possible during the packaging cycle:
Pressing the STOP button
If you press STOP during vacuum generation, this process is interrupted. The controller then starts the
next stage of the program immediately.
9.4.6
Ending packaging
Once the packaging cycle is over, the vacuum chamber opens automatically, the lid opens upwards.
Remove the packaged products from the vacuum chamber.
Remove offcuts of bag plastic from the vacuum chamber and dispose of them in accordance with
regulations.
Once the work is complete, switch off the machine. This procedure is described in the section on
"Switching off the machine".
Clean the machine as described in the section on "Cleaning" and then close the vacuum chambers.
2013-12-17
Art. no. 520.454
Page 38/91