Disposal - vc999 K12 Translation Of The Original Operating Manual

Double Chamber - Vacuum Packaging Machines VC999 K12/K12N/K12A/K12NA

Disposal

16 Disposal
When you purchase lubricant and bag material, check that they are environmentally friendly and are not
harmful to people. Also check the disposal regulations and the possibilities for disposing of these
properly in your local area.
The owner is responsible for disposing of the machine. It is responsible for ensuring that the machine is
disposed of carefully and in compliance with valid local regulations. It is required to comply with the
following instructions, in particular:
Before the machine is disassembled, disconnect it from outside supply lines:
Power supply
 Unplug it at the mains and remove the plug from the electric cable.
Inert gas (only in VC999 K12N, VC999 K12NA machines)
 Cut off the inert gas supply. Close the valve on the gas cylinder and detach the hose which is
attached to the inert gas valve with a clip.
NOTICE
The machine must be dismantled by a skilled technician.
Procedure for final decommissioning:
 Drain fluids (e.g. oil) into separate containers and send them to appropriate processing firms.
 Dispose of hazardous substances, in accordance with regulations, as special waste.
 Separate plastic parts and send them off for recycling.
 Separate metal parts and arrange to have them shredded or scrapped.
2013-12-17 Art. no. 520.454 Page 64/91