Programming; Selecting A Program Number; Compiling Or Changing A Program - vc999 K12 Translation Of The Original Operating Manual

Double Chamber - Vacuum Packaging Machines VC999 K12/K12N/K12A/K12NA
Operation
9.5.3

Programming

Various basic settings for a program can be defined in the service program. Before you start to program
a packaging program, we recommend that you check and, if necessary, change the basic settings
defined in the service program. In order to do this, read the section on the "Service program".
9.5.3.1

Selecting a program number

 Select the program number in order to compile a new program or to edit an existing program.
A Arrow buttons to select the program number.
B The selected program number is shown on LED display 2. It remains on the display until a new
program number is entered.
9.5.3.2

Compiling or changing a program

Values can be assigned to any program function. The values entered affect the program whose number
is shown on LED display 2.
 Select the appropriate program functions and enter the requested values.
C Program functions
D Arrow buttons for entering or changing the values for the program function currently selected.
E The values set with the arrow buttons are shown on LED display 1.
The values set are saved in the controller. Once the data has been entered, the controller can be
returned to the basic setting by pressing STOP or, if the vacuum pump is running, the program can be
started immediately by closing the vacuum chamber.
Data in protected programs cannot be changed.
2013-12-17 Art. no. 520.454
Fig. 9/10
Fig. 9/11
Page 43/91