Dynamixel Wizard; Operating A Dynamixel Pro - Robotis Dynamixel Pro Quick Start Manual

Quick Start for Dynamixel Pro v1.00b
- Click "Ok" to confirm.

1.1.2 Dynamixel Wizard

i. Operating a Dynamixel PRO
- Supply 24V power to Dynamixel PRO once the wiring is complete. For safety,
finish connecting the wires before supplying the power.
- Open RoboPlus to run Dynamixel Wizard.
- Select a COM Port that refers to the correction of USB-to-Dynamixel dongle to
your PC and click
- Once the port is connected, select 'DXL 2.0' and '57600,' then click 'Start
Searching.' Dynamixel PRO's Default ID setting is 1 and baud rate of 57600 bps.
button to connect to USB-to-Dynamixel.
Page 9 / 139