Dynamixel Pro Firmware Recovery With Dynamixel Wizard - Robotis Dynamixel Pro Quick Start Manual

Quick Start for Dynamixel Pro v1.00b
xiii. Dynamixel PRO Firmware Recovery with Dynamixel Wizard.
- Dynamixel Wizard can be used to recover the Dynamixel PRO's firmware if there
is an issue.
※ When firmware is recovered, all the settings are set to default; therefore,
-
the ID and baud rate must be checked. Be sure to have the USB-to-Dynamixel
dongle properly set to the appropriate connector (RS-485).
※ When recoverying the firmware, Dynamixel PRO must be connected one
-
at a time. Dynamixel PRO may malfunction if two or more Dynamixel PROs
are daisy chained when recoverying the firmware.
- Begin Dynamixel PRO firmware recovery by clicking on the firmware recovery
icon from the toolbar.
- Select thet COM port number of the dongle to begin firmware recovery.
- Please read the instructions and begin Dynamixel PRO firmware recovery.
- Only one Dynamixel PRO must be linked to before initiating the Dynamixel
firmware recovery.
Page 34 / 139