Robotis Dynamixel Pro Quick Start Manual page 71

Quick Start for Dynamixel Pro v1.00b
printf( "Torque On...\n"
Result = dxl_write_byte(Port, ID, P_TORQUE_ENABLE, 1, &ErrorStatus);
if( Result != COMM_RXSUCCESS )
{
printf(
printf(
_getch();
return
}
//Change the Goal Velocity
printf("Press any key to change goal
_getch();
Result = dxl_write_dword(Port, ID, P_GOAL_VELOCITY, 5000, &ErrorStatus);
if( Result != COMM_RXSUCCESS )
{
printf(
printf(
_getch();
return
}
else
{
if(ErrorStatus != 0 )
else
}
//Close the port of USB2DXL
printf( "Press any key to terminate...\n"
_getch();
//Torque Off
printf( "Torque Off...\n"
Result = dxl_write_byte(Port, ID, P_TORQUE_ENABLE, 0, &ErrorStatus);
if( Result != COMM_RXSUCCESS )
{
printf(
printf(
_getch();
return
}
dxl_terminate(Port);
return 0;
}
);
"Failed to write!\n" );
"Press any key to terminate...\n"
0;
velocity...\n");
"Failed to write!\n" );
"Press any key to terminate...\n"
0;
PrintErrorCode(ErrorStatus);
printf("Succeed to chage the operationg
);
"Failed to write!\n" );
"Press any key to terminate...\n"
0;
);
);
mode!\n");
);
);
Page 71 / 139