Robotis Dynamixel Pro Quick Start Manual page 35

Quick Start for Dynamixel Pro v1.00b
- Dynamixel PRO cannot be searched automatically because the firmware is not
recognized.
manually. Since Dynamixel PRO cannot be recognized if the port is in use, finish
other programs, and then continue the procedure.
- Select USB-to-Dynamixel-connected port and press "Search" button. Select the
port the USB-to-Dynamixel dongle is connected to and click 'Search.'
- Turn off Dynamixel PRO then turn it back on to let the program detect Dynamixel
PRO.
- If the Dynamixel PRO is not detected turn Dynamixel PRO off and on again.
Therefore, you must set the Dynamixel PRO connected port
Page 35 / 139