Support Software Functions Used As Required - Omron NXEIP202 User Manual

9 Setting Up Slave Terminals
9-2-6

Support Software Functions Used as Required

You can use the following functions on the Support Software.
• Getting NX Unit serial numbers
• Comparing and merging with actual Unit configuration of the Slave Terminal
• Exporting/importing NX Unit settings
• Uploading Slave Terminal settings through the USB port on the EtherNet/IP Coupler Unit
• Adding additional Slave Terminals
Comparing and Merging with Actual Unit Configuration of the Slave
Terminal
You can compare the Unit configuration information in an Slave Terminal that was created offline with
the actual Unit configuration. You can also use this command to merge a configuration that was created
offline with the actual configuration.
1
Go online, right-click anywhere in the Edit Slave Terminal Configuration Tab Page, and select
Compare and Merge with Actual Unit Configuration.
The actual Unit configuration is read and compared with the Unit configuration on the Support
Software.The results are displayed in the Compare and Merge with Actual Unit Configuration
Dialog Box.
2
To merge with actual Unit configuration, click the Apply Actual Unit Configuration button.
The configuration information on the Support Software will now match the actual Unit configura-
tion.
3
Click the OK button.
The display returns to the Edit Slave Terminal Configuration Tab Page.
9 - 24
NX-series EtherNet/IP Coupler Unit User's Manual (W536)