Omron NXEIP202 User Manual page 35

Manual name
NY-series IPC Machine W556
Controller Industrial Box
PC Hardware User's
Manual
NY-series IPC Machine W558
Controller Industrial
Panel PC / Industrial
Box PC Software User's
Manual
NY-series IPC Machine W563
Controller Industrial
Panel PC / Industrial
Box PC Built-in Ether-
Net/IP Port User's
TM
Manual
NY-series Instructions W560
Reference Manual
NY-series IPC Machine W559
Controller Industrial
Panel PC / Industrial
Box PC Motion Control
User's Manual
*1. From revision 05 of this manual, information on the NX-series Temperature Input Units (NX-TS) that were includ-
ed in previous revisions was moved to the following manual: NX-series Analog I/O Units User's Manual for Temperature
Input Units and Heater Burnout Detection Units (Cat. No. W566). Accompanying that change, the name of this manual
was changed from the NX-series Analog I/O Units User's Manual (Cat. No. W522) to the NX-series Analog I/O Units Us-
er's Manual for Analog Input Units and Analog Output Units (Cat. No. W522).
*2. The NX-series Temperature Input Units (NX-TS) that were included in the NX-series Analog I/O Units User's
Manual (Cat No. W522) in revision 04 and earlier revisions were moved to this manual. For revision 05 of the NX-series
Analog I/O Units User's Manual (Cat No. W522), the manual name was changed to NX-series Analog I/O Units User's
Manual for Analog Input Units and Analog Output Units (Cat No. W522-E1-05).
NX-series EtherNet/IP Coupler Unit User's Manual (W536)
Cat. No. Model numbers
NY512-
NY532-
NY512-
NY532-
NY512-
NY532-
NY512-
NY532-
NY512-
Application
Learning the basic An introduction to the entire NY-series
system is provided along with the fol-
specifications of
the NY-series lowing information on the Industrial Box
Industrial Box PCs, PC.
including introduc-
• Features and system configuration
tory information,
• Introduction
designing, installa-
• Part names and functions
tion, and mainte-
• General specifications
nance.
• Installation and wiring
Mainly hardware
• Maintenance and inspection
information is pro-
vided.
Learning how to The following information is provided
program and set on NY-series Machine Automation Con-
up the Controller trol Software.
functions of an
• Controller operation
NY-series Indus-
• Controller features
trial PC.
• Controller settings
• Programming based on IEC 61131-3
language specifications
Using the built-in Information on the built-in EtherNet/IP
EtherNet/IP port port is provided.
on an NY-series
Information is provided on the basic
Industrial PC.
setup, tag data links, and other func-
tions.
Learning detailed The instructions in the instruction set
specifications on (IEC 61131-3 specifications) are
the basic instruc- described.
tions of an
NY-series Indus-
trial PC
Learning about The settings and operation of the Con-
motion control set- troller and programming concepts for
tings and program- motion control are described.
ming concepts of
an NY-series
Industrial PC.
Related Manuals
Description
33