Omron NXEIP202 User Manual page 60

2 Features and System Configuration
The scope of access from the Sysmac Studio when it is connected to the USB port on the EtherNet/IP
The scope of access from the Support Software when it is connected to the USB port on the Ether-
Net/IP Coupler Unit is limited to the EtherNet/IP Slave Terminal at the connection. Support Software
cannot access any Units that are not at the connection (such as other EtherNet/IP slaves, or other Eth-
erNet/IP Slave Terminals).
2 - 10
NX-series EtherNet/IP Coupler Unit User's Manual (W536)