Omron NXEIP202 User Manual page 336

12 Troubleshooting
Event name Memory All Cleared
Meaning The Unit settings were cleared.
Source EtherNet/IP
Error Level
attributes
Effects User program
Sys- Variable
tem-defined
None
variables
Cause and Assumed cause
correction
The Clear All Memory operation
was executed.
Attached Attached information 1 and 3: Unit number of the NX Unit where the Clear All Memory operation was per-
information formed. If the Clear All Memory operation was performed for the entire Slave Terminal, the information given
will be 255.
Attached information 2 and 4: Execution results
Precautions/ Refer to the attached information for the results of the Clear All Memory operation.
Remarks
12 - 48
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
0: Successful
1: Hardware error
2: Initialization failed
3: Initialization not possible
Event code 90430000 hex
EtherNet/IP Detection
Coupler Unit timing
--- Log category
The Unit settings were cleared.
Name
---
Prevention
---
NX-series EtherNet/IP Coupler Unit User's Manual (W536)
When
commanded
from user
Access