Omron NXEIP202 User Manual page 367

Parameter name
General Status
Size of Additional Status
Additional status
*1. If the general status code in the response code is 0x1F (Vendor specific error), the value is 0x01.
*2. This is stored only when the value of Size of Additional Status is 0x01.
CIP error code
General status code (hex)
02
13
15
1F
20
*1. Refer to General Status Code on page A-30 for error descriptions.
 Clear Event Log (Service Code: 3C Hex)
The request format, format for normal responses, format for error responses, and CIP error codes
for the Clear event log object are given below.
Request Format
Parameter name
Service
Request Path Size
Request Path
Unit No
Event log type
Format for Normal Response
Parameter name
Reply Service
Reserved
General Status
Size of Additional Status
Format for Error Response
Parameter name
Reply Service
Reserved
NX-series EtherNet/IP Coupler Unit User's Manual (W536)
Description
Current error code defined by CIP
Size of Additional status
Additional status
Description Data type
Service code USINT
Request path size USINT
Request path Padded EPATH
Unit number UINT
Type of event log UINT
Description
Reply to Clear event log service
Reserved
Code that indicates normal
Size of Additional status
Description
Reply to Clear event log service
Reserved
Data
type
USINT
USINT
UINT
*1
Error code
Resource unavailable
Not enough data
Too much data
Vendor specific error
Invalid parameter
3C
02
20742401
0000: Communications Coupler Unit
0001 to 003F: NX Unit
0040 or higher: Not supported.
0000: System event log
0001: Access event log
0002: Both system event log and access
event log
Data Value
type (hex)
USINT BC
USINT 00
USINT 00
USINT 00
Data
type
USINT
USINT
Appendices
Value (hex)
Current error code
*1
00
*2
Additional status
Value (hex)
Value (hex)
BC
00
A - 19
A