Omron NXEIP202 User Manual page 419

Change
Function or addi-
tion
NX Unit control Addition
with CIP objects
Setting IO-Link Addition
devices from
Support Soft-
ware other than
the Sysmac
Studio con-
nected to
peripheral USB
port on the Eth-
erNet/IP Cou-
pler Unit
Communica- Addition
tions Interface
Unit control
BOOTP client Addition
*1. The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the Ether-
Net/IP Coupler Unit.
The following table shows the relationship when the CJ2H-CPU6/CJ2M-CPU1/CP1H CPU Unit
is connected.
Change
Function or addi-
tion
NX Unit control Addition
with CIP objects
Setting IO-Link Addition
devices from
Support Soft-
ware other than
the Sysmac
Studio con-
nected to
peripheral USB
port on the Eth-
erNet/IP Cou-
pler Unit
Communica- Addition
tions Interface
Unit control
BOOTP client Addition
*1. The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the Ether-
Net/IP Coupler Unit.
NX-series EtherNet/IP Coupler Unit User's Manual (W536)
Ether-
Net/IP
CS1W-EIP2
Coupler
CPU Unit 1/CJ1W-EIP
Unit
Ver.1.2 Ver.3.0 Ver.2.1
Ether-
Net/IP
Coupler
CPU Unit CJ1W-EIP21
Unit
Ver.1.2 Ver.1.0 Ver.2.1
Corresponding unit version/version
Nwtwork
Configura-
tor for Eth-
21
erNet/IP
Ver.3.00 Ver.1.00
Corresponding unit version/version
Nwtwork
Configura- NX-IO Con-
tor for Eth-
erNet/IP
Ver.3.00 Ver.1.00
Appendices
NX-IO Con- CX-Config-
figurator uratorFDT
*1
Ver.2.4
CX-Config-
figurator uratorFDT
*1
Ver.2.4
NX
Unit
restric
tions
None
Yes
Yes
None
A
NX Unit
restric-
tions
None
Yes
Yes
None
A - 71