Omron NXEIP202 User Manual page 371

Attribute ID
(hex)
01
02
*1
03
04
*1
05
06
0D
64
66
69
*1. The new settings are enabled after the power supply is cycled.
*2. This indicates the following: 192.168.250.1, 255.255.255.0, 0.0.0.0, 0.0.0.0, 0.0.0.0, "".
*3. The maximum number of characters is 64.
*4. This is 1,024 to 65,535 decimal. You cannot set 8AE or AF12.
NX-series EtherNet/IP Coupler Unit User's Manual (W536)
Parameter name
Interface Configu- Interface IP address setting
ration Status condition
Configuration Controller configuration and
Capability settings that are possible for
the interface
Configuration Con- IP address setting method
trol when interface started
Physical Link Path to physical link object
Object
Path size Path size in words
Path Fixed path to physical link
object
Interface Configu- Interface settings
ration
IP Address IP address
Network Mask Subnet mask
Gateway Default gateway
Address
Name Server Primary name server
Name Server 2 Secondary name server
Domain Name Domain name
Host Name Host name
Encapsulation Encapsulation inactivity tim-
Inactivity Timeout eout time
NTP server NTP server IP address
IP address
Time zone Time zone
TCP/UDP Mes- TCP/UDP message service
sage Service server port number
Server Port No.
Description Attribute
Read
Read
Read or
Write
Read
Read
Read
Read or
Write
Read or
Write
Read or
Write
Read or
Write
Read or
Write
Read or
Write
Appendices
Data type Value (hex)
DWORD See below.
DWORD See below.
DWORD See below.
STRUCT
UINT 0002 (fixed)
Padded 20F62401 (fixed)
EPATH
STRUCT
*2
UDINT C0A8FA01
(fixed)
UDINT FFFFFF00
(fixed)
UDINT 00000000 (fixed)
UDINT 00000000 (fixed)
UDINT 00000000 (fixed)
STRING 0000 (fixed)
STRING 0000 (fixed)
UINT 0000: Disabled
0000 to 0E10:
Timeout time (s)
Default: 0078
SHORT_S 0: NTP client dis-
abled.
*3
TRING
Not 0: IP
address of NTP
server
Default: "0"
UINT See below.
Default: 000F
UINT
*4
0400 to FFFF
Default: FA00
A - 23
A