Omron NXEIP202 User Manual page 270

11 EtherNet/IP Coupler Unit Functions
2
Click the Controller Event Log Tab.
The event log for the EtherNet/IP Coupler Unit is displayed.
Click the Update button to display the latest event log.
If an event is for a Slave Terminal, the node number of the Slave Terminal and the NX Unit num-
ber are displayed as the source details.
Additional Information
• The NX Unit numbers that are displayed as the source in the event log are the NX Unit num-
bers in the current Unit configuration. They are not necessarily the NX Unit numbers at the
time that the event occurred.
• You can check the NX Unit event log that is stored in the EtherNet/IP Coupler Unit for NX
Units that are no longer mounted under the EtherNet/IP Coupler Unit. To check them, select
everything or select the EtherNet/IP Slave Terminal in the Select the Display Target from the
Controller Event Log Tab Page. The event log display will also include NX Units that were
previously mounted to the EtherNet/IP Coupler Unit. For these NX Units, the NX Unit number
is the number when the error occurred.
To display the event log for only the currently mounted NX Units, select the NX Units in the
Select the Display Target.
• If the most recent version of the Support Software is not used, the Support Software may not
support some events. The event code and attached information are displayed correctly.
Use the most recent version of the Support Software to check events.
11 - 14
NX-series EtherNet/IP Coupler Unit User's Manual (W536)