Switch Id Led; Figure 6: Switch Id Led; Figure 7: Switch Id Led With Low Power Mode Disabled - Allied Telesis x330-10GTX Installation Manual

Switch ID LED

The Switch ID LED, shown in Figure 6, is for the VCStack feature, which
allows multiple switches to function as a single unit. The x330-10GTX
switch does not support the VCStack feature. It operates as a standalone
device with a Switch ID of "0".
The possible states of the LED depend on whether the switch is operating
in the low power mode, which is enabled or disabled with the eco-friendly
button. Refer to "eco-friendly Button" on page 30. The states of the LED
when low power mode is disabled are shown in Figure 7 on page 31.
The switch is booting up.
The switch has encountered a fault condition.
The switch is a standalone unit.
The switch has an ID number of 1 to 8 as part of
a VCStack. (The x330-10GTX switch does not
support stacking.)
The dot in the lower right corner flashes when the switch
accesses a USB flash drive.
Figure 7. Switch ID LED With Low Power Mode Disabled
The switch displays the letter "F" for fault on the ID LED if it detects a
problem, such as overheating.
x330-10GTX Gigabit Ethernet Switch Installation Guide
Figure 6. Switch ID LED
31