projector will be automatically
detected and adjusted in order to
correct any keystone distortion.
(7) MENU button
(pages 25 and 26)
This button is used to display
menu screens. When a menu
screen is being displayed, it can
be used to return to a previous
screen or to clear the screen.
(D
ENTER button
(page 26)
This button is used to accept and
to activate items selected in the
on-screen menus.
(9)Arrow
(A, T,
◄ and ►)
buttons
(page 26)
These buttons are used to select
and adjust items in the on-screen
menu screens.
© FREEZE button
(page 27)
This button is used to
momentarily freeze the image so
that a still picture is displayed.
(fj)VOLUME +/- buttons
These buttons are used to adjust
the volume of the sound output
by the projector's built-in
speakers. Refer to page 25 for
details on how to adjust the
volume using the buttons on the
projector control panel.
©INDEX WINDOW button
(page 34)
This button can be used to split
the image projection area into a
still image and a moving image.
©D.ZOOM +/- buttons
(page 28)
These buttons are used to
enlarge certain portions of the
projected image.
©STD (standard) button
(page 27)
This button is used to reset the
projector adjustment values to the
factory default settings.
©SHUTTER button
(page 35)
This button is used to
momentarily turn off the picture
and sound.
Storing the card
remote control unit
® Extend the carrying handle.
©Open the card remote control
unit holder.
(3) Place the remote control unit
inside.
©Close the card remote control
unit holder and retract the
carrying handle.
15