Table of Contents
Advertisement
Application software supported by the projector
The projector supports following application software.
For details or downloading application software except for "Geometric & Setup Management Software" and
"Projector Network Setup Software", visit the following website.
https://panasonic.net/cns/projector/
"Geometric & Setup Management Software" and "Projector Network Setup Software" can be downloaded from the
following website ("Panasonic Professional Display and Projector Technical Support Website").
https://panasonic.net/cns/projector/pass/
It is necessary to register and login to PASS
Technical Support Website".
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
f Logo Transfer Software
This application software transfers the original image, such as company logo, which is projected at the start, to
the projector.
f Smart Projector Control
This application software sets and adjusts the projector connected to the network using a smartphone or a
tablet.
f Multi Monitoring & Control Software
This application software monitors and controls the multiple display devices (projector and flat panel display)
connected to an intranet.
f Early Warning Software
This plug-in software monitors the status of the display devices and their peripherals within an intranet, and
notifies of abnormality of such equipment and detects the signs of possible abnormality. "Early Warning
Software" is pre-installed in the "Multi Monitoring & Control Software". To use the early warning function of
this plug-in software, install "Multi Monitoring & Control Software" in the PC to be used. By enabling the early
warning function, it will notify of the approximate time to replace the consumables for the display devices,
to clean each part of the display devices, and to replace the components of the display devices, allowing to
execute maintenance in advance.
The early warning function can be used by registering maximum of 2048 display devices free of charge for
90 days after installing the "Multi Monitoring & Control Software" into a PC. To continuously use after the 90
days, it is necessary to purchase the license of "Early Warning Software" (ET-SWA100 Series) and perform
the activation. Also, depending on the type of license, the number of display devices that can be registered for
monitoring varies. For details, refer to the Operating Instructions of "Multi Monitoring & Control Software".
f Geometric & Setup Management Software (Geometry Manager Pro)
This application software performs detailed corrections and adjustments such as the geometric adjustment
which cannot be covered by the projector settings in real-time. Also, this allows simple automatic adjustment of
geometry correction, edge blending, color, and brightness according to the shape of the screen through use of a
camera.
f Projector Network Setup Software
This application software allows to set the network information, such as the IP addresses, and the projector
names, for multiple projectors connected to the network collectively. Also, the administrator account, network
information, and projector name can be set for the projector that does not have the administrator account set
using this software.
Storing
To store the projector, store in a dry room.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Also, dispose of the
product without disassembling.
Cautions on use
rTo get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds
over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from
shining onto the screen.
24 - ENGLISH
Chapter 1 Preparation — Precautions for use
to download from "Panasonic Professional Display and Projector
*1
Advertisement
Table of Contents
