Storing; Disposal; Cautions On Use - Panasonic PT-MZ10K Operating Instructions Manual

f Geometric & Setup Management Software (Geometry Manager Pro)
This application software performs detailed corrections and adjustments such as the geometric adjustment
which cannot be covered by the projector settings in real-time. Also, by applying the optional Upgrade Kit (Model
No.: ET-UK20), the function of "Geometric & Setup Management Software" is expanded to perform further
detailed geometric adjustment. To perform auto screen adjustment using a camera, purchasing and activation
of the optional Auto Screen Adjustment Upgrade Kit (Model No.: ET-CUK10) and the optional Auto Screen
Adjustment Upgrade Kit (PC) (Model No.: ET-CUK10P) are required.
"Geometric & Setup Management Software" can be downloaded from the Panasonic website (https://panasonic.
net/cns/projector/pass/). It is necessary to register and login to PASS
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
For details, visit the Panasonic website (https://panasonic.net/cns/projector/pass/).

Storing

To store the projector, store in a dry room.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Also, dispose of the
product without disassembling.

Cautions on use

rTo get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds
over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from
shining onto the screen.
rDo not touch the surface of the projection lens with your bare hands.
If the surface of the projection lens becomes dirty from fingerprints or anything else, this will be magnified and
projected onto the screen.
Attach the lens cover supplied with the projector or with the optional projection lens to the projector when you do
not use the projector.
rLCD panel
The LCD panel is manufactured by a technology with extremely high precision, but there may be missing pixels or
pixels that is constantly illuminated in a rare case. Note that these phenomenon are not malfunction.
Also, a residual image may remain in the image of the LCD panel when a still image is projected for long time, and
in such case, project a full white image for 1 hour or longer. Note that the residual image may not be completely
erased.
rDo not move the projector or subject it to vibration or impact while it is operating.
Doing so may shorten the life of internal components or result in malfunctions.
rOptical parts
The replacement cycle for the optical parts such as the LCD panel or polarization plate may become shorter even
if it is used for less than one year when the ambient temperature is high or in an environment with large amount of
dust or cigarette smoke. For details, consult your dealer.
rLight source
The light source of the projector uses laser diode, and has the following characteristics.
f Depending on the operating environment temperature, the luminance of the light source will decrease.
The higher the temperature becomes, the more the luminance of the light source decreases.
f The luminance of the light source will decrease by duration of usage.
If brightness is noticeably reduced and the light source does not turn on, ask your dealer to clean inside the
projector or replace the light source unit.
rComputer and external device connections
When connecting a computer or an external device, read this manual carefully regarding the use of power cords
and shielded cables as well.
24 - ENGLISH
Chapter 1 Preparation — Precautions for use
to download.
*1