Projector Body - Panasonic PT-MZ10K Operating Instructions Manual

Projector body

Front
1 2 3 4 5
6 7
Rear
8
6 10
Top
17
Projection direction
1 Remote control signal receiver (front)
2 Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
3 Light source indicator <LIGHT>
Indicates the status of the light source.
4 Temperature indicator <TEMP>
Indicates the internal temperature status.
5 Filter indicator <FILTER>
Indicates the status of the air filter unit.
6 Adjustable feet
Adjusts the projection angle.
7 Intake vent
8 Exhaust vent
9 Connecting terminals (x page 31)
Chapter 1 Preparation — About your projector
7 6
9 8
12 14 15 6
11 13
18
Side
16
Bottom
10 <MAIN POWER> switch
Turns on/off the main power.
11 Power cord holder
12 <AC IN> terminal
Connect the supplied power cord.
13 Remote control signal receiver (rear)
14 Security slot
This security slot is compatible with the Kensington security
cables.
15 Control panel (x page 30)
16 Air filter cover
There is the air filter unit inside.
17 Top slide cover
There is the lens lock lever for mounting the projection lens
inside. (x page 43)
7
19
ENGLISH - 29