[Screen Setting]; [Auto Signal]; [Auto Setup] - Panasonic PT-MZ10K Operating Instructions Manual

[USER]

[SCREEN SETTING]

Set the screen size.
Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed.
Set as necessary for the screen in use.
1) Press as to select [SCREEN SETTING].
2) Press the <ENTER> button.
f The [SCREEN SETTING] screen is displayed.
3) Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
[SCREEN FORMAT]
[16:10]
[4:3]
[16:9]
4) Press as to select [SCREEN POSITION].
f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].
5) Press qw to adjust [SCREEN POSITION].

[AUTO SIGNAL]

Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP>
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SIGNAL].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]

[AUTO SETUP]

Set this function when adjusting a special signal for still image signal, or horizontally long (such as 16:9) signal.
Setting with [MODE]
1) Press as to select [AUTO SETUP].
2) Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[WIDE]
[USER]
f Proceed to Step 7) when [DEFAULT] or [WIDE] is selected.
Chapter 4 Settings — [DISPLAY OPTION] menu
For each signal format of RGB signal and YC
magenta, and yellow can be adjusted and registered. Press the <ENTER> button and set the details.
Adjustment is possible within the range of -31 to +31.
Range when [SCREEN POSITION] is selected
Cannot be adjusted.
Adjusts the horizontal position between -160 and 160.
Adjusts the vertical position between -60 and 60.
Sets the auto signal function to off.
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
Standard setting.
Select this item when an image aspect ratio is a wide-screen signal, which does not meet the
[DEFAULT] setting.
Select this when receiving a signal with a special horizontal resolution (number of display dots).
C /YP P signal, six colors of red, green, blue, cyan,
B R B R
ENGLISH - 103