Panasonic PT-MZ10K Operating Instructions Manual page 239

r Connecting terminal
<RGB IN> terminal
<DVI-D IN> terminal
<HDMI IN> terminal
<SDI IN> terminal
<SERIAL/MULTI PROJECTOR
SYNC IN>/ <SERIAL/MULTI
PROJECTOR SYNC OUT>
terminal
<REMOTE 1 IN> terminal
<REMOTE 2 IN>/ <REMOTE 2
OUT> terminal
<DIGITAL LINK> terminal
<LAN> terminal
<DC OUT> terminal
r Compatible signal
For details of the types of video signals that can be used with the projector, refer to "List of compatible signals"
(x page 232).
RGB signal input
f Resolution: 640 x 480 to 1 920 x 1 200
f Dot clock frequency: 162 MHz or less
f PIAS (Panasonic Intelligent Auto Scanning) system
YC C /YP P signal input
B R B R
f Resolution: 480p/576p to 1 920 x 1 080
f Dot clock frequency: 148.5 MHz or less
f The HD/SYNC and VD terminals do not support 3 value SYNC.
DVI-D signal input
f Moving image signal resolution: 480p/576p to 1 920 x 1 080
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 162 MHz
HDMI signal input
f Moving image signal resolution: 480p/576p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 594 MHz
DIGITAL LINK signal input
f Moving image signal resolution: 480p/576p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 297 MHz
SDI signal input
HD-SDI signal
3G-SDI signal
Chapter 7 Appendix — Specifications
1 set, high-density D-Sub 15 p (female)
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
1 set, HDMI 19 p, HDCP 2.2 compatible, Deep Color compatible
1 set (BNC)
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
1 set, D-Sub 9 p, for contact control
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
1 set, RJ-45, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX, Art-Net
compatible
USB connector (type A) x 1, for power supply (DC 5 V, maximum 2 A)
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
P : 0.7 V [p-p] 75 Ω
B R
compliant), PJLink (class 2)
TM
ENGLISH - 239