Panasonic PT-MZ10K Operating Instructions Manual page 134

[SECONDARY INPUT]
Set the secondary input switching function that will automatically switch to the specified input when the input
signal of projecting image is discontinued.
1) Press as to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f The [NO SIGNAL SETTING] screen is displayed.
3) Press as to select [SECONDARY INPUT].
4) Press the <ENTER> button.
f The [SECONDARY INPUT] screen is displayed.
5) Press as to select the input to be specified as the switching destination, and press the <ENTER>
button.
[OFF]
[HDMI]
[DVI-D]
[SDI]
[RGB]
[DIGITAL LINK]
[BACK COLOR]
Set the display of the screen when a signal is not input.
1) Press as to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f The [NO SIGNAL SETTING] screen is displayed.
3) Press as to select [BACK COLOR].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[BLUE]
[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f The [BACK COLOR] setting item is common with the following menu item.
g The [DISPLAY OPTION] menu → [BACK COLOR]
f To create and register the [USER LOGO] image, use "Logo Transfer Software".
The software can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).
[NO SIGNAL LIGHTS-OUT]
This is a function to automatically turn off the light source of the projector when there is no input signal for specific
period. The time until the light source is turned off can be set.
1) Press as to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f The [NO SIGNAL SETTING] screen is displayed.
3) Press as to select [NO SIGNAL LIGHTS-OUT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[DISABLE]
134 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Disables the secondary input switching function.
Sets the secondary input to HDMI.
Sets the secondary input to DVI-D.
Sets the secondary input to SDI.
Sets the secondary input to RGB.
Sets the secondary input to DIGITAL LINK.
Displays blue in the entire screen.
Displays black in the entire screen.
Displays the Panasonic logo in the screen.
Displays the image registered by the user in the screen.
Disables the no signal lights-out function.