Panasonic PT-MZ10K Operating Instructions Manual page 175

[Https set up] page
Set this page when HTTPS (Hypertext Transfer Protocol Secure) communication encrypted with the SSL/TLS
protocol is to be performed between the computer and the projector while the web control function is used.
To perform the HTTPS communication, it is necessary to install the certificate for authentication into the projector.
Click [Detailed set up] → [Https set up].
1 [CRT Key generate]
Generates the CRT (Certificate) key.
The page to generate the CRT key is displayed by clicking
[Execute].
For details, refer to "Generating the CRT key" (x page 176).
2 [Self-signed Certificate]
[Generate]:
Generates the self-signed certificate by the projector.
The page to generate the self-signed certificate is displayed by
clicking [Execute].
For details, refer to "Generating the self-signed certificate"
(x page 180).
[Information]:
Displays the status of the self-signed certificate.
f [Not generated]: Self-signed certificate is not generated.
f [(host name)]: Self-signed certificate is generated and valid.
The host name registered in the self-signed certificate is
displayed.
f [Invalid (Reason: Server Certificate installed)]: The server
certificate is valid, so the generated self-signed certificate is
invalid.
Information of the generated self-signed certificate is displayed
by clicking [Confirm].
The generated self-signed certificate can be deleted by clicking
[Delete].
For details, refer to "Confirming the information of the self-
signed certificate" (x page 180).
Note
f When the [Connection] setting is changed from [HTTPS] to [HTTP], the screen may not be displayed when the operation or update of the
web control screen is performed. In such case, delete the cache of the web browser.
f The [Crestron Connected(TM)] page cannot be operated when [Connection] is set to [HTTPS].
f Installation operation of the certificate may not be possible depending on the computer or web browser in use.
Chapter 5 Operations — Web control function
1
2
3
4
5
6
3 [Server Certificate]
[Generate Certificate Signing Request]:
Generates signing request (Certificate Signing Request).
The page to generate the signing request is displayed by
clicking [Execute].
For details, refer to "Generating the signing request"
(x page 178).
[Server Certificate install]/[Intermediate Certificate install]:
Installs the server certificate and the intermediate certificate.
The certificate is installed into the projector by specifying the
certificate file and clicking [Execute].
For details, refer to "Installing the certificate" (x page 179).
[Information]:
Displays the status of the server certificate.
f [Invalid]: The server certificate is not installed. Or, the
current CRT key is different from the CRT key used for
requesting the installed server certificate.
f [(host name)]: The server certificate is installed and valid.
The host name registered in the server certificate is
displayed.
f [Expired]: Valid period of the server certificate has expired.
The host name registered in the server certificate is displayed
when the server certificate is installed and valid.
Information of the installed server certificate is displayed by
clicking [Confirm].
The installed server certificate and the intermediate certificate
can be deleted by clicking [Delete].
For details, refer to "Confirming the information of the server
certificate" (x page 179).
4 [Connection]
Sets the connection method to the projector.
f [HTTP]: Uses the HTTP communication. (Factory default
setting)
f [HTTPS]: Uses the HTTPS communication.
5 [HTTPS port]
Sets the port number to be used with the HTTPS
communication.
Allowed port number: 1 to 65535
Factory default setting: 443
6 [Set]
Enables the setting.
ENGLISH - 175