Panasonic PT-MZ10K Operating Instructions Manual page 165

4) Press as to select [NETWORK SETUP], and press the <ENTER> button.
f The [NETWORK SETUP] screen is displayed.
5) Perform the [NETWORK SETUP] setting.
f Refer to [NETWORK SETUP] (x page 158) for details.
Note
f To connect to an existing network, perform after consulting your network administrator.
r Factory default setting
f Following setting has been made as a factory default.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]/[DNS2]
Operating the computer
1) Turn on the power of the computer.
2) Perform the network setting following the instruction of your network administrator.
f Operation from the computer is possible by configuring the network setting of the computer as follows if the
projector is in the factory default setting.
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
Chapter 5 Operations — Network connection
OFF
192.168.0.8
255.255.255.0
192.168.0.1
None
192.168.0.10
255.255.255.0
192.168.0.1
ENGLISH - 165