[Shutter Setting] - Panasonic PT-MZ10K Operating Instructions Manual

Initializing adjustments for [USER CORRECTION]
Return the setting values of the brightness for the selected [ADJUSTMENT LEVEL] and the color unevenness of
each image position to the factory setting values.
1) Press as to select [UNIFORMITY].
2) Press qw to select [USER CORRECTION], and press the <ENTER> button.
f The [UNIFORMITY:USER CORRECTION] screen is displayed.
3) Press as to select [ADJUSTMENT LEVEL].
4) Press qw to select the item to initialize in [ADJUSTMENT LEVEL].
5) Press as to select [INITIALIZE].
6) Press the <ENTER> button.
f The confirmation screen is displayed.
7) Press qw to select [OK], and press the <ENTER> button.
Note
f All correction data in [ADJUSTMENT LEVEL] cannot be initialized at once.
For each setting in [ADJUSTMENT LEVEL], select the item and execute [INITIALIZE] individually.
f To initialize correction data in [UNIFORMITY] at once, select the [PROJECTOR SETUP] menu → [INITIALIZE] → [UNIFORMITY ONLY] and
execute the initialization.
f [TEST PATTERN] is not initialized. Select the item and execute the initialization individually.
Setting [PC CORRECTION]
Set the [PC CORRECTION] function to correct the brightness unevenness and color unevenness of the entire
screen using a computer and the "Geometric & Setup Management Software".
To use the [PC CORRECTION] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase
the product, consult your dealer.
1) Press as to select [UNIFORMITY].
2) Press qw to select [PC CORRECTION], and press the <ENTER> button.
f The [UNIFORMITY:PC CORRECTION] screen is displayed.
f Advanced skills are necessary to use computer control correction.

[SHUTTER SETTING]

Set the operation of the shutter function.
Setting [FADE-IN] or [FADE-OUT]
Set the image fade-in and fade-out when the shutter function operates.
1) Press as to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3) Press as to select [FADE-IN] or [FADE-OUT].
4) Press qw to switch the item.
[FADE-IN]
[FADE-OUT]
Note
f Press the <SHUTTER> button on the remote control or the control panel during fade-in or fade-out to cancel the fade operation.
118 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Item
[OFF]
[0.5s] - [10.0s]
Adjustment
Does not set fade-in or fade-out.
Sets the fade-in or fade-out time.
Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s]. [0.5s] -
[4.0s] can be selected in increments of 0.5.