Panasonic PT-MZ10K Operating Instructions Manual page 93

[UPPER LEFT]
[LINEARITY]
Horizontal direction
[FREE GRID]
Finer adjustment is possible by selecting the points or lines to be corrected.
For details of operation, refer to "Adjusting distortion with [FREE GRID]" (x page 93).
Adjusting to desired linearity
1) Press as to select [GEOMETRY].
2) Press qw to select [CORNER CORRECTION].
3) Press the <ENTER> button.
f The [GEOMETRY:CORNER CORRECTION] screen is displayed.
4) Press as to select [LINEARITY].
5) Press qw to select [MANUAL].
6) Press the <ENTER> button.
f The [LINEARITY] screen is displayed.
7) Press asqw to adjust.
Adjusting distortion with [FREE GRID]
1) Press as to select [GEOMETRY].
2) Press qw to select an item other than [OFF].
3) Press the <ENTER> button.
f The screen for the selected item is displayed.
4) Press as to select [FREE GRID].
5) Press qw to select an item.
f The items will switch each time you press the button.
[OFF]
[ON]
f Proceed to Step 6) when [ON] is selected.
6) Press the <ENTER> button.
f The [FREE GRID] screen is displayed.
7) Press as to select [GRID RESOLUTION].
8) Press qw to switch the item.
f The items will switch each time you press the button.
Chapter 4 Settings — [POSITION] menu
[CORNER CORRECTION]
[UPPER RIGHT]
Disables the adjustment to be performed with [FREE GRID].
Enables the adjustment to be performed with [FREE GRID].
[LOWER LEFT]
Vertical direction
[LOWER RIGHT]
ENGLISH - 93