Panasonic PT-MZ10K Operating Instructions Manual page 18

Features of the Projector
High luminance and high contrast
and low noise
▶ With a high efficiency optical system and
unique drive system that draws maximum
solid-state light source output, high
luminance of 16 000 lm
3 000 000:1 , and low noise of 38 dB
*2
achieved with its high color reproduction
even with its compact size.
*1 A value for PT-MZ16K. A value for PT-MZ13K is 13 000 lm. A
value for PT-MZ10K is 10 000 lm.
*2 When [DYNAMIC CONTRAST] is set to [3]
*3 A value for PT-MZ16K. A value for PT-MZ13K and
PT-MZ10K is 35 dB.
When [OPERATING MODE] in [OPERATION SETTING] is
set to [NORMAL]
Easy and highly flexible setup
▶ In addition to DIGITAL LINK support,
Art-Net support, and abundant lineup of
optional lenses, the projector has realized
flexible installation with wide latitude that
supports all 360° direction projection
utilizing the feature of solid-state light
source. More advanced rendition in wide
range of usages is now possible. With
the superior compatibility with the devices
other than projectors, more advanced
rendition in wide range of usage is
possible.
Long life and high reliability
▶ The maintenance cost for long-term
operation is reduced by the unique light
source cooling control technology and
improvement of the dust resistance. Also,
it will contribute to the stable operation by
implementation of the backup function that
will continue the projection by switching to
the backup input signal immediately even
when the input signal is discontinued, in
addition to adopting solid-state light source
which has long life.
18 - ENGLISH
, high contrast of
*1
are
*3
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(x page 34)
2. Attach the projection lens
(optional).
(x page 43)
3. Connect with external devices.
(x page 46)
4. Connect the power cord.
(x page 53)
5. Switch on the projector.
(x page 56)
6. Make initial settings.
(x page 57)
Execute the lens calibration.
(x page 69)
f Take this step when you switch on the
power for the first time after purchasing the
projector.
7. Select the input signal.
(x page 66)
8. Adjust the image.
(x page 67)