Panasonic PT-MZ10K Operating Instructions Manual page 59

Chapter 3 Basic Operations — Switching on/off the projector
Relationship between brightness and runtime
When [OPERATING MODE] is set to [NORMAL], [USER1], [USER2], or [USER3], the projector can be operated
with arbitrary brightness and runtime by setting [LIGHT OUTPUT] to desired setting.
The relationship between the [LIGHT OUTPUT] setting, brightness, and the estimated runtime is as follows. Make
the initial setting (operation setting) depending on the desired brightness of the projected image and runtime.
The values of the brightness and the runtime are just an estimate, and the graph indicating the relationship is just
an example. Also, these do not indicate the warranty period.
r PT-MZ16K
[LIGHT OUTPUT] (%)
100.0
80.0
60.0
40.0
*1 Estimated runtime is the time until the brightness decreases to approximately half of the time of delivery when the projector is used with the
[PICTURE] menu → [DYNAMIC CONTRAST] set to [3] and under environment of 0.15 mg/m
r PT-MZ13K
[LIGHT OUTPUT] (%)
100.0
80.0
60.0
40.0
*1 Estimated runtime is the time until the brightness decreases to approximately half of the time of delivery when the projector is used with the
[PICTURE] menu → [DYNAMIC CONTRAST] set to [3] and under environment of 0.15 mg/m
Brightness (lm)
16 000
12 800
9 600
6 400
100.0
90.0
80.0
70.0
60.0
50.0
40.0
30.0
20 000 21 000 22 000
Estimated runtime (hours)
Brightness (lm)
13 000
10 400
7 800
5 200
100.0
90.0
80.0
70.0
60.0
50.0
40.0
30.0
20 000 21 000 22 000
Estimated runtime (hours)
dust.
3
16 000
6 400
23 000 24 000 25 000
dust.
3
13 000
5 200
23 000 24 000 25 000
Estimated runtime (hours)
*1
20 000
21 500
23 000
25 000
Estimated runtime (hours)
*1
20 000
21 500
23 000
25 000
ENGLISH - 59