Precautions For Attaching The Ceiling Mount Bracket - Panasonic PT-MZ10K Operating Instructions Manual

Chapter 7 Appendix — Precautions for attaching the Ceiling Mount Bracket

Precautions for attaching the Ceiling Mount Bracket

f When installing the projector to a ceiling, use the Ceiling Mount Bracket (Model No.: ET-PKD120H (for High
Ceilings), ET-PKD120S (for Low Ceilings), ET-PKD130H (for High Ceilings, 6-axis Adjustment)) together with
Ceiling Mount Bracket (Model No.: ET-PKE301B (Projector Mount Bracket)).
Model No.: ET-PKD120H (for High Ceilings), ET-PKD120S (for Low Ceilings), ET-PKD130H (for High
Ceilings, 6-axis Adjustment), ET-PKE301B (Projector Mount Bracket)
f Attach the drop-prevention set that comes with the Ceiling Mount Bracket to the projector. If you need the drop-
prevention set (Service Model No.: DPPW1004ZA/X1) separately, consult your dealer.
f When the projector is mounted to the existing Ceiling Mount Bracket (in combination with the Model No.:
ET-PKD120H (for High Ceilings) or ET-PKD120S (for Low Ceilings), and the Model No.: ET-PKE300B (Projector
Mount Bracket)), it is necessary to replace the drop-prevention wire rope with the one corresponding to this
projector. Consult your dealer.
Drop-prevention set (service model no.: DPPW1004ZA/X1)
f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any damage to the projector resulting from use of the Ceiling Mount
Bracket not manufactured by Panasonic or the inappropriate choice of location for installing the Ceiling Mount
Bracket, even if the warranty period of the projector has not expired.
f Unused products must be removed promptly by a qualified technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use
electric screwdrivers or impact screwdrivers.
(Screw tightening torque: 4 ± 0.5 N·m)
f Read the Installation Instructions of the Ceiling Mount Bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Specification for the screw holes to fix the projector (projector bottom view)
Unit: mm
M6
12 (15/32")
ENGLISH - 241