[Status] Menu - Panasonic PT-MZ10K Operating Instructions Manual

Chapter 5 Operations — Using the information monitor function
5) Press as to select [DHCP].
f The current setting is displayed.
6) Press the <ENTER> button.
f Setting can be changed.
7) Press qw to switch the setting item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f This setting item is common with the following menu item in the on-screen menu.
g The [NETWORK] menu → [NETWORK SETUP] → [DHCP]
r Specifying the IP address
Set the IP address, the subnet mask, and the default gateway if a DHCP is not used.
1) Press as to select [SETUP].
2) Press the <ENTER> button.
f The sub-menu item is displayed.
3) Press as to select [NETWORK].
4) Press the <ENTER> button.
f The detailed setting item is displayed.
5) Press as to select [IP ADDRESS], [SUBNET MASK], or [DEFAULT GATEWAY].
f The current setting is displayed.
6) Press the <ENTER> button.
f Setting can be changed.
7) Press asqw to enter the address.
f Press qw to select the number to change, and press as to change the number.
8) Press the <ENTER> button.
f The setting is reflected.
Note
f This setting item is common with the following menu item in the on-screen menu.
g The [NETWORK] menu → [NETWORK SETUP] → [IP ADDRESS]/[SUBNET MASK]/[DEFAULT GATEWAY]
f The number can be entered with the number (<0> - <9>) buttons on the remote control when the projector is in the standby status.

[STATUS] menu

Display the status of the projector.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
f The sub-menu item is displayed.
3) Press as to select an item.
Sub-menu item
[PROJECTOR]
[INFO MONITOR]
[NETWORK]
[VERSION]
194 - ENGLISH
Acquires the IP address automatically if a DHCP server exists in the network where the projector is to
be connected.
Set [IP ADDRESS], [SUBNET MASK], and [DEFAULT GATEWAY] if a DHCP server does not exist in
the network where the projector is to be connected.
Displays the information of the projector.
Displays the setting information of the information monitor.
Displays the setting information of wired LAN.
Displays the firmware version of the projector.
Overview