Accessories - Panasonic PT-MZ10K Operating Instructions Manual

Accessories

Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the
number of accessories.
Wireless/wired remote control unit <1>
(N2QAYA000208)
Power cord
(K2CM3YY00028)
200 V - 240 V
(K2CT3YY00053)
200 V - 240 V
(K2CG3YY00218)
100 V - 120 V
Attention
f After unpacking the projector, discard the power cord cap and packaging material properly.
f Do not use the supplied power cord for devices other than this projector.
f For missing accessories, consult your dealer.
f Store small parts in an appropriate manner, and keep them away from small children.
Note
f The type and number of the supplied power cords vary depending on the country or region where you purchased the
product.
f Use one supplied lens fixing screw when attaching the projection lens to the projector. In addition to the one screw to be
used, three spare screws are supplied. Store them appropriately so that they do not get lost.
f The model numbers of accessories are subject to change without prior notice.
Chapter 1 Preparation — Precautions for use
For Korea
(K2CZ3YY00032) <1>
200 V - 240 V
For India
(K2CZ3YY00058) <1>
200 V - 240 V
For Taiwan
(K2CH3YY00009) <1>
200 V - 240 V
AAA/R03 or AAA/LR03 battery <2>
(For remote control unit)
Lens fixing screw <4>
(DPHD1005ZA/X1)
ENGLISH - 25