[Art-Net Channel Setting] - Panasonic PT-MZ10K Operating Instructions Manual

[OFF]
[ON(2.X.X.X)]
[ON(10.X.X.X)]
[ON(MANUAL)]
f Proceed to Step 3) when anything other than [OFF] is selected.
3) Press the <ENTER> button.
f The [Art-Net SETUP] screen is displayed.
4) Press as to select an item, and press qw to switch the setting.
[NET]
[SUB NET]
[UNIVERSE]
[START ADDRESS]
5) Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
6) Press qw to select [OK], and press the <ENTER> button.
Note
f If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.

[Art-Net CHANNEL SETTING]

Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to "Using Art-Net
function" (x page 218).
1) Press as to select [Art-Net CHANNEL SETTING].
2) Press qw to switch the item.
[2]
[USER]
[1]
f When [2] or [1] is selected, the function assigned to the channel is displayed by pressing the <ENTER>
button.
f Proceed to Step 3) when [USER] is selected.
3) Press the <ENTER> button.
f The [Art-Net CHANNEL SETTING] screen is displayed.
4) Press as to select the channel to set, and pressqw to switch the item.
[LIGHT OUTPUT]
[INPUT SELECT]
[LENS POSITION]
[LENS H SHIFT]
[LENS V SHIFT]
[LENS FOCUS]
[LENS ZOOM]
[POWER]
[SHUTTER]
[FADE-IN]
[FADE-OUT]
[GEOMETRY]
[CUSTOM MASKING]
[FREEZE]
[COLOR]
160 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Disables the Art-Net function.
Enables the Art-Net function and sets the IP address to 2.X.X.X.
Enables the Art-Net function and sets the IP address to 10.X.X.X.
Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].
Enter [NET] to be used when the projector processes Art-Net.
Enter [SUB NET] to be used when the projector processes Art-Net.
Enter [UNIVERSE] to be used when the projector processes Art-Net.
Enter [START ADDRESS] to be used when the projector processes Art-Net.
Uses the channel assignment in standard setting.
Changes the channel assignment.
Uses the channel assignment with DZ21K series compatible.
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
Adjusts the amount of light.
Switches the input.
Moves the lens position.
Adjusts the lens shift in the horizontal direction.
Adjusts the lens shift in the vertical direction.
Adjusts the focus.
Adjusts the zoom.
Controls the power status.
Controls the shutter.
Sets the fade-in time.
Sets the fade-out time.
Performs geometric adjustment.
Corrects using the "Geometric & Setup Management Software"
Freezes the projected image.
Adjusts the color saturation.
.
*1