Programming The Function Codes - Hengstler Tico 772 Instruction Manual

3
Setup and
Operation
3.7 Programming the Function Codes
The function codes (system parameters) are used to program the function and behavior of the inputs and
outputs, as well as the behavior of the device in its adjusted basic mode. The selection options are described in
detail in Chapters 5 to 9.
Programming mode Change function setting Save and change to next Save and change to
function code counter operation
+
Keep pressed and switch press press press
Power on simultaneously
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 57