Intermediate
cut
:
Additional
tot
alizer
(su
mmation
cou
nter)
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 83
5
Depending on the application it may become necessary to isolate the main signal during
the reset, e.g. when the first material lengths or certain lengths showing material
defects have to be cut on length-cutting systems.
The additional totalizer sums up all values, even if the main counter is continually reset.
The shift key can be used to switch between the counter reading and the total sum. The
totalizer can only be reset manually.
To do this, select the total sum from the first row; then press the reset keys.
51
Pulse counter
06.07.2010 10:31:52