Hengstler Tico 772 Instruction Manual page 218

Output signals
Mode
of
Operati
on:
Prescaler
Out
put PSC-
out:
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 218
9
Batch Counter
The counter operates in the coincidence mode, i.e. the output signals are
enabled for the programmed duration when the selected preset value is reached.
131
The Prescaler output is an application output.
With each increase of the counter reading the number of output pulses corresponds
to the respective number of increments.
The pulse length of the prescaler output corresponds
to a frequency of 500 Hz.
When using the prescaler output the max. input frequency is:
F max = 500 / PSC.
So it is possible that the maximum input frequency can not be reached.
06.07.2010 10:32:21