Operation
On leaving the programming mode, all the presets are recalculated because not all the values may be attained
with a prescaler value of >1. Therefore, the presets have to be checked and corrected as necessary after
setting the prescaler.
If no key is pressed for more than 16 seconds in the programming mode, the counter will automatically return
to the display mode. In this case, no entries will be saved except the last value saved with the E-key.
Press the Up and Down keys simultaneously to set the prescaler to 01,0000.
Enter Programming mode
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 62
3
Setup and
39
Select a position:
(starts flashing)
Set position
Save and return to
06.07.2010 10:31:48
display mode