Claims for damages resulting from any kind of misuse shall be expressly excluded.
The multifunction counter is built and tested in accordance with IEC/EN 61010-1, Protection Class II – Safety
Measures for Electronic Measuring Equipment. They have left the factory in a condition that is in compliance
with all safety-relevant requirements. In order to maintain this condition and ensure operational safety, the
User is required to observe the safety notes and warnings in these operating instructions.
Danger!
Risk of safety hazards due to incorrect/faulty assembly and connection.
•
The max. operating voltages must not be exceeded!
•
12 – 24VDC and 24VAC multifunction counters must be operated at safety extra-low voltages (SELV) and
under potential-compensated conditions in order to prevent hazardous shock.
•
An external fuse must be provided to protect the multifunction counter (see Chapter 10, Technical Data).
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 1
12
Safety
2.2
Assembly,
9
connection,
programming
06.07.2010 10:31:38