Hengstler Tico 772 Instruction Manual page 75

Static/dynamic
r
eset:
Teach
in
put:
Decimal
P
oint:
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 75
4
General
description of the multifunction counter
Static reset: Reset over the entire pulse width of the reset pulse
Dynamic reset: Reset via the active edge; thereafter, counter operation is possible
independently of the pulse width of the reset pulse.
Exception: Tachometers do not have a reset/set function
Using the Teach Input (application input) the counter status is imported in Preset 2.
The decimal point is only an optical reading assistence on the display and does not
change the value. For example, for a value of 1 pulse per cm, the setting 0,00 makes it
easier to read the value in m and cm.
Exception: This does not apply to tachometers and timers.
Please refer to chapters 6 and 7.
46
47
06.07.2010 10:31:51