Hengstler Tico 772 Instruction Manual page 73

Reset/Set:
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 73
4
General
description of the multifunction counter
Manual setting via keys (lockable)
Electronic setting via control input (and/or application input)
Automatic programming after reaching the main Preselection
Programmable Power-On Reset
Depending on the function code the counter is:
1.) Reset: reset to 0
P 2 is the main Preset (preselect) value
During unidirectional counting the counter will add up.
or
2.) Set: reset to P 2
Signal 2 at 0
During unidirectional counting the counter will subtract.
For time counting, batch counting or shift counting, it is possible to reset partial sums
or the total sum, batch counter or second totalizer individually or at the same time
via the application input.
06.07.2010 10:31:51