Operation
Change
In the function code Programming Mode, the first row shows the name of the function code in the form of
text (7-segment display). The second row shows the selectable option in a text form. By simultaneously
pressing the Up and Down buttons, the display in the first row changes to a numerical display; after pressing
these buttons once again, the display in the second row also changes to a numerical display. Pressing these
buttons for a third time reverts both rows back to the text display.
Attention: With each change among text and numeric display, the currently
selected function code will return to the factory default setting and may have to
be readjusted.
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 58
3
Setup and
36
between
Text
Display
and
Numerical
Display
06.07.2010 10:31:46